Note: If the Scanner was initialized with Rotary Switch Override selected in the
“Scanner Settings” dialog box, you cannot change these settings from the
keypad.
Select this option during the two-minute countdown to adjust the settings for
recording interval and significant change threshold. Use the SET KEY to toggle
between the two settings and the arrow keys to adjust the settings up and down.
DIAG
This option shows serial numbers and installed options which may be of use. It
contains no user-adjustable features.
AUTO/MANL (Manual)
If this option is set on AUTO, the LCD will automatically scroll through all four
channel displays (when the 1 CH or DEMD option is selected from the main menu)
or through all measurements (when 4 CH is selected from the main menu), pausing
several seconds on one display before going to the next. If this option is set on
MANL (manual), you must use the arrow keys to move from display to display.
MANL is the default setting.
To Next Page
Loading...