User Manual PocketBook 360° Plus
FW: E360plus.15.4
Warning! Do not destroy the battery by burning it, to avoid explosion
hazards!
Warning! The screen is made on a glass substrate and is a fragile
component. Its surface is covered with a layer of elastically transparent
material. A characteristic feature of mechanical damage to part of the
screen is that the section of the screen in question does not refresh when
changing the image, even if there may be no visible cracks. If such signs
are observed contact the authorized service center.
Avoid any mechanical pressure on the screen exceeding 1 N. Protect
the screen from objects that may scratch or damage it. To ensure
adequate protection of the screen, we recommend storing the device in a
protective and/or hard cover.
Do not use organic or inorganic solvents (e.g. benzol etc.) to clean
the screen/case. Use a soft cloth to remove dust from the device's
surface. Do remove dirt apply a few drops of distilled water. To remove
persistent dirt contact the authorized center.
The protective cover is an element increasing the product's
resistance to mechanical damage. However, it can not fully prevent the
possibility of mechanical damage of the device or its components
resulting from extreme physical handling.
Do not expose the screen to electrostatic charges or artificial sources
of UV electromagnetic radiation.
Never leave cables near heat sources. Heated cables or their
insulation may become deformed or damaged, which could lead to fire or
electric shock.
Avoid any mechanical impacts onto connectors and keys of the
device. This may affect their operation and cause malfunction.
To Next Page
Loading...
