3.32
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
12.Remove the oil line
t
from the fitting
y
and quickly
plug the fitting hole.
NOTICE
Place a rag under the fitting to catch any spilled oil.
13.Remove the oil tank
u
.
14.Remove the fasteners
i
retaining the rear of the
clutch guard
o
and remove the clutch guard by
sliding the front out of the fender.
15.Remove the push rivets
a
retaining the intake tube to
the intake plenum.
16.Remove the cable tie
s
securing the upper intake
tube to the chassis.
17.Remove the diagnostic connector
d
from the cap.
18.Remove the fastener
f
retaining the lower intake
tube.
ENGINE / COOLING / EXHAUST