3
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
3.147
5. Slide the PBR back onto bracket and align mounting
holes. Install the two fasteners
h
and torque to
specification.
TORQUE
PBR Fasteners:
6 ft-lbs (8 N·m)
6. Install the fasteners
f
that retain the support brace
g
. Torque the fasteners to specification.
TORQUE
Left Support Brace Fasteners:
22 ft-lbs (30 N·m)
7. Carefully install the intake plenum assembly
d
into
place.
8. Install the edge clip
s
retaining the wiring harness to
the intake plenum.
9. Connect the ECU to the wiring harness
a
.
ENGINE / COOLING / EXHAUST
To Next Page
Loading...
Need help?
General
