3.148
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
10.Carefully install the intake tube assembly
o
.
NOTICE
Ensure the intake tube is properly seated to the air box
and properly aligned with the intake plenum.
11. Install the fastener
i
retaining the lower intake tube.
Torque the fastener to specification.
TORQUE
Lower Intake Tube Fastener:
36 in-lbs (4 N·m)
12.Install the diagnostic connector
u
into the cap.
13.Install the cable tie
y
securing the upper intake tube
to the chassis.
14.Install the push rivets
t
retaining the intake tube to
the intake plenum.
ENGINE / COOLING / EXHAUST
To Next Page
Loading...
Need help?
General
