Polaris 850 MATRYX SWITCHBACK ASSAULT 146 2021 User Manual

3.156
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
6. Connect the EGT sensor
r
to the wiring harness.
7. Properly route and secure the slack in the EGT
sensor wire to the load center routing clip with a new
cable tie
t
.
8. Install the Exhaust Seal, Socket
y
.
NOTICE
Inspect; replace if damaged.
9. Inspect the upper and lower resonator mounts.
10.Set the resonator in place.
NOTICE
Ensure the resonator is properly positioned on the
resonator mounts.
11. Install the exhaust spring
u
securing the rear of the
resonator in place.
12.Install the exhaust spring
i
fastening the front of the
resonator to the chassis.
ENGINE / COOLING / EXHAUST

Polaris 850 MATRYX SWITCHBACK ASSAULT 146 2021 Specifications

General

Brand	Polaris
Model	850 MATRYX SWITCHBACK ASSAULT 146 2021
Category	Snowmobiles
Language	English