5.10
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
6. Remove the push rivets
y
retaining the intake tube to
the intake plenum.
7. Remove the cable tie
y
securing the upper intake
tube to the chassis.
8. Remove the diagnostic connector
u
from the cap.
9. Remove the fastener
i
retaining the lower intake
tube.
10.Carefully remove the intake tube assembly
o
.
11. Disconnect the ECU connectors
a
form the wiring
harness.
12.Remove the edge clip
s
retaining the wiring harness
to the intake plenum.
FUEL SYSTEM