8
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
8.103
7. Push the shock rod down into the shock body to expel
all of the nitrogen from the shock.
8. Remove the shock rod / bearing cap from the shock
body.
CAUTION
Residual nitrogen gas may exist inside shock. Wear
eye protection and use caution when removing shock
rod / bearing cap.
9. Remove the shock from the vise and pour shock oil
into an approved container. Place shock back into
vise.
10.Push the reservoir cap down, and remove the snap
ring.
11. Remove the reservoir cap from the reservoir.
12.Remove the bleed screw and O-ring from the internal
floating piston (IFP).
STEERING / SUSPENSIONS
To Next Page
Loading...
Need help?
General
