6.18
BRAKES
REAR CALIPER SERVICE
Caliper Removal
1. Clean caliper area before removal.
2. Using a flare nut wrench, remove the brake line (A). Place
a container to catch brake fluid draining from brake line.
3. Remove the caliper mounting bolts (B) and remove the
caliper assembly from the caliper mount.
Caliper Disassembly
1. Remove the c-clips (A) from the caliper sliding bolts.
2. Remove the caliper slide bolts (B), mounting bracket (C),
and brake pads (D).
3. Remove the outside dust boot (E).
4. Remove the piston and seal (F).
A
B
A
B
A
C
D
E
F
To Next Page
Loading...
