CLUTCH
6.27
DRIVEN CLUTCH DISASSEMBLY / INSPECTION, CONT.
5. Check alignment of tabs on spring. Replace the
spring if tabs are misaligned or the spring coils are
distorted.
6. Inspect ramp buttons in the moveable sheave and
replace if worn. NOTE: The ramp buttons are
secured by Torx¥ screws (T20).
7. Remove moveable sheave and note the number of
spacer washers. One spacer must remain
between the sheaves when adjusting belt
deflection.
Tabs Aligned
Belt deflection adjustment
washers
To Next Page
Loading...
