CLUTCH
6.28
DRIVEN CLUTCH DISASSEMBLY / INSPECTION, CONT.
8. Inspect the Teflon
¥
coating on the moveable
sheave bushing.
9. Inspect driven clutch faces for wear or damage.
10. Clean and inspect splines on helix and
transmission input shaft.
11. Lube splines with a light film of grease. Do not
lubricate the bushings!
Inspect bushings for wear
Moveable Sheave Bushing Inspection:
Replace the bushing if more brass than
Teflon
¥
is visible on the bushing. Re-
fer to bushing replacement in this
chapter.
To Next Page
Loading...
