BRAKES
9.27
REAR BRAKE DISC INSPECTION
1. Visually inspect disc for scoring, scratches, or
gouges. Replace the disc if any deep scratches are
evident.
2. Usea0-1s micrometer and measure disc thickness
at 8 different points around perimeter of disc.
Replace disc if worn beyond service limit.
3. Mount dial indicator and measure disc runout.
Replace the disc if runout exceeds specifications.
Measure
Thickness
Rear Brake
Disc
Brake Disc Thickness
Service Limit .167s (4.242 mm)
New .177-.187s (4.496-4.750 mm)
Brake Disc Thickness Variance
Service Limit .002s (.051 mm)
difference between measurements
Brake Disc Runout
Service Limit .010s (.25 mm)
To Next Page
Loading...
