Polaroid 636 restyle - Discharging Strobe Capacitor and Disconnecting Flex Circuits

11
Repair Manual Addendum Disassembly/Reassembly
10. Discharge strobe capacitor by holding dump probe on capacitor terminals (Figure 2-9) for
5 - 10 seconds.
Caution
SHOCK HAZARD! Always discharge strobe capacitor BEFORE proceeding
with disassembly, to avoid painful shock from charged strobe capacitor.
Figure 2-9. Discharging strobe capacitor and disconnecting flex circuits
Strobe PC
Board
Flashtube Assembly
Lower Housing
S12
J1
Flash Shield
Strobe Capacitor
Dump Stick