37
Getting started
Please make sure that the battery in your device is fully
charged. Refer to the hardware section of this manual for
instructions covering how to charge your system.
• Power up the unit and tap NAVIGATION on the first
screen.
Choosing a language
If more than one language is available on your device, you will
be prompted to select the desired language. The language
selected will change not only the audible commands that you
hear during navigation, but also the text displayed throughout
the user interface.
• Click on the flag representing the desired country
language
o You may change the language selection at any time
• On the next screen, choose the desired voice type to
be used for the voice commands during navigation
(e.g., female or male voice)
Set time zone
Your PND automatically determines the time through the GPS
signal. However, you must set the time zone.
• Select your time zone from the list
o
It can be changed at a later time (see page 58)
• Press the Confirmation icon
Safety Warning Message
Next, a screen that displays a safety warning will be shown.
• Please read the safety precautions
To Next Page
Loading...
General