Using the PDC-3000 with your PC 180
transferred. A two-digit numeral will be appended to the six
characters, producing a unique, 12-character name for each
file.)
To transfer the pictures to your TWAIN application, click the
Transfer to Application button (
). (This button is not
available if you are running PDC Direct.)
Note: After transferring the pictures to an application, you
must save each one to disk using the Save As command in the
application. Most image-processing applications allow you to
choose a file format for the pictures you are saving. See
instructions with your image-processing application for a
description of formats available to you.
To Next Page
Loading...
