Setting up 20
a PDC-3000 camera with 38mm-equivalent lens
b Hand strap
c Shoulder strap
d Power adapter/trickle charger: Recharges the NiCad batteries
in the camera and provides power for the camera while the
batteries are charging.
e Camera batteries: Four “AA” NiCad rechargeable batteries.
f SCSI cable (2 meter) and DB25/50 pin Centronics adapter:
Connect the PDC-3000 camera to a PowerMac/PowerPC
computer or PC SCSI port.
g Removeable CompactFlash card: Stores the pictures taken by
the camera. Addional cards can be purchased for increasing
storage capacity.
h Software diskettes (or CD-ROM): PDC Plug-in software for
PowerMac/PowerPC and Windows, TWAIN driver (for
Windows 95 and Windows NT only) and Polaroid PDC
Direct camera utility software for PowerMac/PowerPC and
Windows.
Note: Please be sure to fill out and return the registration
card packed with the PDC-3000 camera. As a registered
owner, you will be among the first to receive information
about PDC software updates and the availability of new
PDC-3000 products.
To Next Page
Loading...
