Maintenance and troubleshooting 227
low light The camera senses insufficient light for taking
pictures without flash. Set the electronic flash to On or to
Auto (see Using flash on page 86) before taking the picture.
no term Invalid buttons have been held down during camera
power-up. Press the Erase button to clear the message.
stuck btn One of the camera control buttons is being held
down. Make sure all buttons are released and continue. If the
problem persists, turn the camera off briefly, then turn it
back on. If this does not solve the problem, contact Polaroid
Technical Assistance (see page 230).
term Invalid buttons have been held down during camera
power-up. Press the Erase button to clear the message.
To Next Page
Loading...
