Polaroid PDC 3000 - Page 85

Using the PDC-3000 camera 85
Indicator Meaning and corrective action
Blinking red Insufficient light; use flash
(below)
or
Camera CompactFlash card is
full; insert another card or erase
one or more pictures (page 92)
after transferring the stored
pictures to the computer (page
127 for PowerMac/PowerPC,
page 173 for PC).
or
Low battery power; recharge
batteries (page 208)
or
Hardware error; see Trouble-
shooting error messages (page
223)
Note: When you see the blinking red LED in the viewfinder,
look at the LCD panel for more information about the
problem.