Inserting the SD Card
1. Slide the battery door open.
2. Insert the SD card into the slot as shown.
3. Close the battery door.
OPEN
BATTERY
Notched corner of SD card
When a memory card is inserted, an
icon appears on the LCD
screen.
Removing the SD Card
1. Slide the battery door open.
2. Gently push the SD card inwards and then release it. The SD card
will eject halfway from the SD card slot.
3. Pull the SD card out of the slot.
4. Close the battery door.
OPEN
BATTERY
IMPORTANT!
• Never insert any other objects besides a SD memory card into the camera’s
card slot. Doing so creates the risk of damaging the camera and card slot.
• Make sure that the terminal of the memory card is facing towards the front
of the camera.
• Should water or any foreign objects ever get into the card slot, immediately
turn off the camera, remove the batteries or disconnect the AC adaptor, and
contact your dealer or nearest service provider.
To Next Page
Loading...
Need help?
General
