POLMAR DB-2 - Page 71

67
VOXsensibilitycanbeadjustedbysettingVOXlevel,Level1isthelowest,so
itneedsthestrongestvoice.
24.VOXendingdelaytime(VOX_DV)
Theradioresumestoreceivingmodesoonaftertransmitting,yourTXvoice
maysometimesnotbesentoutsuccessfully.Toavoidthisproblem,youcan
adjustVOXdelaytimeaftertransmission.Theavailablevaluesare1.5sec.,
1.0sec.,2.0sec.,3.0sec.
25.FMradiofrequencystep(FM_STP)
ToselectfrequencystepforFMradio,theavailablevaluesare25K,50K,100K,
200K.
26.CTCSSscanning(SK_CTS)
Press[
],andthenpress[ ]key,rotatethePOWER/DIALknobkeyto
selectMenu19,LCDdisplays“SKCTS”,press[
]tobeginscanning,press
PTTor[
]keytoconrmthenpress[ ]keytoexit.Theradiowillstop
scanningwhenasameCTCSScodeofotherradiosisreceived,andCTCSS
codeblinks.
RotatethePOWER/DIALknobkeytochangescanningdirection.
27.DCSscanning(SK_DCS)
Press[
],andthenpress[ ]key,rotatethePOWER/DIALknobkeyto
selectMenu20,LCDdisplays“SKDCS”,press[ClItobeginscanning,press
PTTor[
]keytoconrmthenpress[ ]keytoexit.Theradiowillstop
scanningwhenasameCTCSScodeofotherradiosisreceivedandDCScode
blinks.
RotatethePOWER/DIALknobkeytochangescanningdirection.