POLMAR DB-2 - Page 72

68
Reset
ltisusedtoclearallthesettings.
Pressandhold[
]keytoturnonradio,LCDdisplays“RESETYES
?”,thenpress[
]toenterit,youwillhearrstsound,whichmeans
RESETbeginsanditnishedwhenyouhearsecondsoundthenra-
diosenterVFOmodeautomatically
CHANNEL STORAGE AND DELETE
Channel Storage
UnderVFOmode,inputdesiredfrequencybykeypaddirectlyorselectonebyro-
tatingtheknob,andthenpress[
]+[ ]thedigitsblinksatthelefttopoffre-
quency,pressnumbertoinputdesiredchanneldirectlyorrotatetheknobtochoose
desiredone,thenpress[
]forstorage.
Channel delete
1. UnderMRorCHmode,press[
]toturnontheradio,LCDdis-
plays“DEL?’”andchannelnumberblinksattherighttopofLCD.
2. Rotatetheknoborinputchannelnumberyouwanttodelete,thenpress[
]
toconrm
3. Afterdelete,itwillskipintonextchannel,ifyouwanttodeleteit,repeatabove
operation.