Transfer a Call Using Blind Transfer
When you use Blind call transfers, calls transfer as soon as the recipient’s line connects.
Procedure
1. During a call, select Transfer .
2. Dial a number or select a contact from Recent Calls or Contacts.
The call transfers as soon as the recipient’s line connects.
Transfer a Call Using Consultative Transfer
When you use consultative call transfers, you can speak with the recipient and then manually complete
the transfer.
Procedure
1. During a call, select Consult .
The phone places the caller on hold while you start the transfer.
2. Dial a number or select a contact from Recent Calls or Contacts.
3. When the recipient answers, speak with them and then select Complete Transfer to transfer the
call.
If the recipient either doesn't answer your call, or can't accept the call transfer and hangs up
before you transfer the call, the original caller stays on hold. You can resume that call or try to
transfer to another recipient.
Cancel a Transfer
If a contact doesn’t answer the transfer or if you want to remain speaking with the contact on your line,
you can cancel the transfer before it completes.
Procedure
» Select Cancel.
The call doesn’t transfer and becomes active.
Mute the Microphones
Mute the microphone so other parties can't hear you.
Procedure
» Do one of the following:
▪ Select Mute .
▪ Select the Mute key on the phone.
▪ Select the Mute key on the microphone.
Audio Calls
38
To Next Page
Loading...
Need help?
General
