More Features
Customize your earbud swipe settings
Customize your earbud swipe sensor settings in Poly Lens App. Download the app:
poly.com/lens.
By default, your earbud swipe controls vary by activity. To configure in Poly Lens App, go
to Settings > Custom swipe sensor. Changes take effect immediately.
Activity Available swipe sensor settings
Earbuds are idle (not on a
call or streaming media)
• Switch between ANC/Transparency Mode (default)
• Adjust volume
• Status check
• Do nothing
On a call
• Switch between Mute/Unmute (default)
• Adjust volume
• Switch between ANC on/off
• Hold/resume call
• Do nothing
Streaming media or music
• Adjust volume (default)
• Switch between ANC/Transparency Mode
• Track forward/track backward
• Do nothing
Lock your charge case screen
Lock your screen to prevent changes on your touch screen.
Lock your screen by tapping the Unlocked icon on right top corner. To unlock, tap 3
times on Locked screen.
Bluetooth transmitter
Stream audio wirelessly from an in-flight entertainment system or other audio source
with 3.5 mm port.
1 Connect the supplied adapter cable from your charge case USB-C port to the audio
source's 3.5 mm port.
You hear "device connected." Your earbuds are now connected to the audio source
with your charge case working as your Bluetooth transmitter.
21
To Next Page
Loading...
