Earbud swipe sensor controls
Swipe forward or backward on the earbud swipe sensor to control features on your
earbud system.
The swipe sensor is next to metallic windscreen on the top of each earbud stem. Swipe
forward or backward to adjust levels or make changes. Control by swiping either earbud.
Note: Do not press the buttons on both earbuds at the same time. Your earbud features
may not function properly.
By default, your earbud swipe controls vary by activity. To customize these settings, see
Customize your earbud swipe settings.
Control
Activity Swipe sensor gesture
Volume up Streaming media While streaming media, swipe backward. For
more, see Adjust the volume.
Volume down Streaming media While streaming media, swipe forward.
Mute On a call During an active call, swipe to mute or
unmute. For details, see Mute.
ANC (Active Noise
Canceling) /
Transparency Mode
Earbuds idle With earbuds idle, swipe to switch between
ANC and Transparency Mode. For details,
see ANC and Transparency Mode on page
19.
6
To Next Page
Loading...
