4 Put your Bluetooth USB adapter into pair mode by selecting "Pair new device" on the
adapter's main page or overflow menu. Your adapter flashes red and blue.
Pairing is successful when you hear "pairing successful" and "PC connected" and the
Bluetooth USB adapter LED is solid.
Pair mode
Put your earbuds in pair mode to connect to a new device or to pair again.
Choose from 2 ways to put your earbuds in pair mode.
• On your charge case touch screen, select Bluetooth > Pair Device. You hear
"pairing."
• Press and hold your earbud button for 4 seconds until you hear "pairing."
Choose your audio source
Use your charge case touch screen to switch your connection to another paired audio
device.
Your earbud system can connect to up to 2 devices including your USB Bluetooth
adapter and remembers up to 8 devices.
To switch your audio source using your charge case touch screen, go to Audio source >
Switch Device and select from your remembered device list.
17
To Next Page
Loading...
