Connect and pair
Pair to mobile device
1 Remove the earbuds from the charge case to power on.
2 Choose from 2 ways to put your earbuds in pair mode.
•
On your charge case touch screen, select Bluetooth > Pair Device. You hear
"pairing."
• Press and hold your earbud button for 4 seconds until you hear "pairing."
3 Activate Bluetooth
®
on your phone and set it to search for new devices.
• iPhone Settings > Bluetooth > On*
• Android
™
Bluetooth: On > Scan for devices*
Note: * Menus may vary by device.
4 Select " Poly VFree 60 Series."
When your earbuds are successfully paired, you hear “pairing successful” and "phone
connected."
Reconnect
With Bluetooth activated and in range, click your earbud to reconnect to your mobile
device.
Connect to PC
Plug your USB Bluetooth adapter into your computer to get the best connection,
softphone functionality and acoustic sound quality through your earbuds. The adapter
comes pre-paired to your earbuds.
1 Put on your earbuds and insert the USB Bluetooth adapter into your laptop or PC.
15
To Next Page
Loading...
