Poly VVX Series - Using CS500 Series Headset with Poly VVX Phone; Savi Headset Operation; Standard Interface Cable Operation

Poly VVX with CS500 and Savi Series Headset User Guide
Connecting and using the headset with and without the Hands Free Adapter Cable
© POPP.com, Inc. All rights reserved.
For service, call 763-797-7900 or visit www.popp.com
Page 2 of 3 4/1/21
Using the CS500 Series Headset with the Poly VVX Series Telephone
Pictured: CS530
With Headset Hands-Free
Adapter:
(sold separately)
1. If using a Savi headset:
a. Press the power button on the headset to turn the headset on.
b. Verify that the LED above the computer icon on the headset base is off. If the LED is on,
press the button above the computer icon to turn it off.
2. Press the Call Control button on the headset to answer or end calls. The headset plays a
notification in the earpiece when an incoming call is ringing.
Pictured: CS530 Headset
Pictured: CS530
With Plantronics
Telephone Interface Cable:
(included in headset box)
1. Press the Headset key on the Poly telephone to answer or end calls.
Pictured: Poly VVX Series Telephone
2. Press the Call Control button on the headset if the headset is not already powered on. To
conserve battery power, press the Call Control button again when the call is finished to power off
the headset.
Pictured: CS530 Headset