Enabling Headset Memory Mode
This feature is useful for end users who wear a headset full-time. You can set up your phone so that all incoming and outgoing calls
use your headset. At any time, you can switch to handset or speakerphone mode.
To use Headset Memory Mode, you must enable, and then activate, Headset Memory Mode. When Headset Memory Mode is
activated, flashes green (for analog headsets).
To enable Headset Memory Mode:
1. Select Settings from Home view, and select Basic > Preferences > Headset > Headset Memory.
2. From the Headset Memory Mode screen, select Enabled.
3. Press .
4. To activate Headset Memory Mode, press twice. The Headset key will flash to indicate that the phone is in Headset Memory
Mode.
Now, whenever you answer a call, the call will connect to your headset automatically.
If you switch to the speakerphone or the handset, you deactivate Headset Memory Mode. Calls will no longer automatically go to
your headset, unless you choose this mode. To have calls go to your headset again, activate Headset Memory Mode by pressing
twice.
To Previous Page
Loading...
Need help?
General
