Using the Camera
Topics:
▪ Analytics Camera
After you have set up, positioned, and configured the camera settings, you can begin using the camera.
Analytics Camera
The analytics camera provides participant count details and PIP video for the EagleEye Director II
camera.
The analytics camera captures group view video only when the EagleEye Director II camera is in tracking
mode, or when the analytics camera is in a tilt position. At the same time, the two EagleEye IV cameras in
an active state display an LED light. In any other state, the analytics camera does not send video.
The Horizontal Field of View (HFOV) of the analytics camera is 80 degrees. The participants who are
outside the HFOV are not detected by the analytics camera and are not counted or shown in the PIP.
As a best practice to achieve the best group framing video quality, keep the people count under 15
participants.
Related Links
Position the Camera on page 5
Adjust the Analytics Camera
To achieve the best framing of call participants in the PIP window, you can tilt the analytics camera on
your EagleEye Director II camera.
Note: As a best practice, do not use the remote control to adjust camera tilt. Adjusting a cascaded
secondary camera with a remote control does not work.
Procedure
1. In the web interface, select Camera Settings > Analytics Camera.
2. Select Up to tilt the cameras up, or select Down to tilt the cameras down.
Polycom, Inc. 20
To Next Page
Loading...
