4. Ensure that people are sitting within a 3 to 33 feet (0.91 m ~ 10.1 m) viewing range from the
camera.
The following figure shows the framing speaker range of the camera.
Note: Before powering on the camera, connect it to the RealPresence Group Series system
using an HDCI cable. This prevents the camera from automatically entering sleep mode
after three minutes.
Related Links
Analytics Camera on page 20
Scenarios for Meeting Rooms on page 21
Cable Connections
Depending upon your environment and how you want to use the EagleEye Director II camera, cable
connections can vary.
Refer to the figure and table for information on cables, connection to the respective ports, and the related
scenarios where you can use them.
Setting Up Your Camera
Polycom, Inc. 6
To Next Page
Loading...
Need help?
General
