Polycom G7500 Reference Guide

call.escalate2MCU.enable
If set to "1", a point-to-point call on your system can escalate to an impormptu conference call
on an external Polycom MCU.
Calls converted through a RealPresence DMA system gateway (H.323 to SIP or vice versa)
won’t join an impromptu conference call.
To use this feature, make sure you set the relevant voIpProt.SIP.* parameters to register your
system with a Polycom RealPresence Distributed Media Application (DMA) system. You also
must set call..escalate2MCU.conferenceId.
0 (default)
1
call.escalate2MCU.conferenceId
Specifies the conference factory ID associated with the SIP conference factory on your
RealPresence DMA system.
Integer (0-128)
Note: The conference factory ID should come from the same RealPresence DMA
system your video-conferencing system uses for SIP registration. Calls won’t
escalate if the ID you provide isn’t recognized by your RealPresence DMA
system.
Call Parameters
Polycom, Inc. 14

Polycom G7500 Specifications

General

Bluetooth	Bluetooth 5.0
Power Supply	100-240V AC, 50/60 Hz
Audio Features	NoiseBlockAI, Acoustic Fence
Content Sharing	Yes, wired and wireless
Camera	Polycom EagleEye IV or EagleEye Cube
Microphone	Integrated beamforming microphone array
Connectivity	HDMI, USB, Bluetooth, Wi-Fi
Video Standards and Protocols	H.264 AVC, H.265
Video Input	HDMI
Video Output	HDMI
Audio Standards	G.711, G.722, G.722.1, G.729
Audio Input	HDMI
Audio Output	HDMI
Network Protocols	IPv4, IPv6
Wireless	Wi-Fi 802.11a/b/g/n/ac
Ethernet	10/100/1000 Mbps
Resolution	3840 x 2160
Display	External display required
Compatibility	Microsoft Teams, Zoom
Video Resolution	Up to 4K
Operating System	Polycom RealPresence