Polycom G7500 Reference Guide

Serial Port Parameters
Topics:
▪ Serial Port Parameters
This section describes available configuration parameters for your system’s serial port. Included are
permitted values and, if applicable, guidance for configuring related parameters.
Serial Port Parameters
Use the following parameters to configure serial port settings on your G7500 system.
device.serial.mode
Specifies the mode used for the RS-232 serial port.
Control (default) - Receives control signals from a touch-panel control. Allows any device
connected to the RS-232 port to control the system using API commands.
Off - Disables the serial port.
device.serial.baud
Set this to the same value configured on the serial device.
9600 (default)
19200
38400
57600
115200
device.serial.flowControl
Specifies if you want to use hardware flow control between the connected device and your
system.
none (default)
hardware
device.serial.parity
Set this to the same value configured on the serial device.
none (default)
even
odd
device.serial.stopBits
Set this to the same value configured on the serial device.
1 (default)
2
Polycom, Inc. 81

Polycom G7500 Specifications

General

Bluetooth	Bluetooth 5.0
Power Supply	100-240V AC, 50/60 Hz
Audio Features	NoiseBlockAI, Acoustic Fence
Content Sharing	Yes, wired and wireless
Camera	Polycom EagleEye IV or EagleEye Cube
Microphone	Integrated beamforming microphone array
Connectivity	HDMI, USB, Bluetooth, Wi-Fi
Video Standards and Protocols	H.264 AVC, H.265
Video Input	HDMI
Video Output	HDMI
Audio Standards	G.711, G.722, G.722.1, G.729
Audio Input	HDMI
Audio Output	HDMI
Network Protocols	IPv4, IPv6
Wireless	Wi-Fi 802.11a/b/g/n/ac
Ethernet	10/100/1000 Mbps
Resolution	3840 x 2160
Display	External display required
Compatibility	Microsoft Teams, Zoom
Video Resolution	Up to 4K
Operating System	Polycom RealPresence