2. Assign an index to a specific camera model for per-camera configurations.
video.camera.1.type="EagleEyeDirectorII"
3. Set a per-camera configuration.
video.camera.1.trackingMode="FrameSpeaker"
Video Parameters
Use the following parameters to configure video settings on your G7500 system.
Note: Remember that per-camera configurations override common camera configurations. For
example, if you set video.camera.[index].videoQuality for a specific camera, the
video.camera.videoQuality parameter is overridden.
video.layout.contentMirror
Specifies your content layout preference during an active call when using dual monitors.
0 (default) - Content displays only on the secondary monitor.
1 - Content displays on the primary and secondary monitors.
video.layout.selfviewPIP
Specifies your Self View layout preference during an active call when using dual monitors.
0 (default) - Self View displays on the entire screen of the secondary monitor.
1 - Self View displays in the corner of the secondary monitor.
video.monitor.1.display
Specifies how you want to configure the primary monitor.
auto (default) - The highest-supported resolution of the primary monitor is detected.
manual - Lets you set the monitor resolution with video.monitor.1.resolution.
video.monitor.1.resolution
Specifies the primary monitor resolution.
Monitor resolution is automatically configured if you set video.monitor.1.display="auto".
3840x2160p 25Hz
3840x2160p 30Hz
3840x2160p 50Hz
3840x2160p 60Hz
1920x1080p 50Hz
1920x1080p 60Hz (default)
video.monitor.2.display
Specifies how you want to configure the secondary monitor.
off - Disables the secondary monitor.
auto (default) - The highest-supported resolution of the secondary monitor is detected.
Video Parameters
Polycom, Inc. 90
To Next Page
Loading...
Need help?
General
