Network Parameters
Topics:
▪ Provisioning Basic Wired LAN Properties
▪ Provisioning Basic Wi-Fi Properties
▪ Network Parameters
This section describes available network configuration parameters. Included are permitted values and, if
applicable, guidance for configuring related parameters.
Provisioning Basic Wired LAN Properties
You can provision your G7500 system to automatically obtain some wired LAN properties—including IP
address, subnet mask, default gateway, and DNS server(s)—by setting
device.net.mode=“Automatically”.
These LAN properties can also be provisioned individually by setting device.net.mode=“Manually”.
In this situation, you must set all of the following additional parameters or no LAN properties will provision
successfully:
▪ device.net.ipAddress
▪ device.net.subnetMask
▪ device.net.ipGateway
Note: Setting device.net.dns.server.* parameters is optional when
device.net.mode=“Manually”.
When your system obtains these LAN properties automatically, you can’t then overwrite individual
properties by setting device.net.ipAddress=“192.0.2.255”, for example.
When provisioning a new IP address for your system, active sessions through the system web interface
don’t automatically refresh. You must enter the new IP address in your browser to re-establish access.
Provisioning Basic Wi-Fi Properties
You can provision your G7500 system to automatically obtain some Wi-Fi properties—including IP
address, subnet mask, default gateway, and DNS server(s)—by setting
device.net.secondaryNetwork.mode=“Automatically”.
These Wi-Fi properties can also be provisioned individually by setting
device.net.secondaryNetwork.mode=“Manually”. In this situation, you must set all of the
following additional parameters or no Wi-Fi properties will provision successfully:
▪ device.net.secondaryNetwork.ipAddress
▪ device.net.secondaryNetwork.subnetMask
▪ device.net.secondaryNetwork.ipGateway
Polycom, Inc. 41
To Next Page
Loading...
Need help?
General
