Input Resolution Maximum Frame Rate(s)
XGA 1024×768 60
SVGA 800×600 60
Note
:
Check your device's documentation for information on configuring HDMI resolutions and refresh
rates.
Procedure
1. Connect one end of an HDMI cable to the HDMI output port on your device.
2. Connect the other end of the cable to the HDMI input port on the Pano system.
Stop Sharing Content
When you are finished presenting content, make sure you end the sharing session.
Procedure
1. Do one of the following depending on how you are sharing content:
▪ Disconnect the HDMI cable from your computer or other user device.
▪ End the screen-mirroring session on the AirPlay or Miracast-certified device.
▪ Select X
on the panel bar of an individual content source.
▪ Select end session button on the toolbar to close all sessions. If the system is in the
process of saving snapshots, you will receive a message and have the option continue
ending the session.
Note
:
Selecting the end session button closes and deletes all whiteboards, blackboards,
and snapshots that were created during the session.
Content Sharing Limitations
The following content-sharing features are not supported by the Pano device:
▪ High-bandwidth digital content protection (HDCP)
▪ Casting from direct streaming sources, such as web links, YouTube
™
, or Google Chromecast
®
Sharing Content
Polycom, Inc. 9
To Next Page
Loading...
Need help?
General
