Note
:
If you’re connected with a Polycom Pano or Polycom video system with inactivity for over three
minutes, you’re disconnected from it automatically.
Procedure
» Select on top of the screen, then select Disconnect > Yes.
Sharing Content
After you’re connected to a Polycom video system, you can share content on it.
Note
:
To minimize content distortion, the resolution of the target content should be smaller than two
times that of the output. For example, if the video stream resolution is 1920 x 1080, the suggested
maximum content resolution is 2400 x 1350.
Sharing Local Content
You can share local content with or without signing in to the Polycom Cloud Service.
Follow these steps:
1. Start Screen Sharing on page 19
2. Connect to a Pano System or Polycom Video System on page 19
3. Share Local Content on page 21
Share Local Content
You can share your local desktop or running applications after you are connected to a Pano system or
Polycom video system.
You need to connect to a Pano or Polycom video system that is in the same network segment as your
device. Otherwise, local content sharing may not be available.
You can share one local content source at a time.
Procedure
1. (When signed in to Polycom
®
Cloud Service) Select My Screen .
2. Do one of the following:
▪ To share your desktop, select Desktop.
▪ To share a running application, select the application's name.
The Shared Content toolbar displays at the top of your selected content source.
Sharing Cloud and/or Local Content
You can share both local content and files in your Microsoft
®
OneDrive
®
for Business folders.
Follow these steps:
1. Sign in to the Polycom Cloud Service on page 18
Polycom
®
Pano
™
App
Polycom, Inc. 21
To Next Page
Loading...
Need help?
General
