Polycom Pano - End Sessions on the Pano System; Icons

Procedure
1. When sharing content, choose one of the following layout control options:
▪ Maximize content window shared on Pano screen
▪ Restore content window shared on Pano screen
End Sessions on the Pano System
You can force end all connections from a Pano system. This also ends all content sharing sessions, if
any.
This feature is available only when you are within the same network segment as the Pano system.
You can use this feature for the following use cases:
▪ Before connecting to a Pano system to share content, force end all connections to ensure that there
are no undesired device connections.
▪ Before leaving a meeting, end all connections and sharing sessions on the Pano system.
Procedure
1. Do one of the following:
▪ When connected to a Pano
system, select Disconnect
, then select End Session
.
▪ From the application Main window, select a Pano system from Nearby Rooms or Recent
Rooms, select and then select End Session.
▪ From the Find Other Rooms
window, enter the IP address or system name of a Pano
system, select
and then select End Session.
For
Pano systems listed in Nearby Rooms, Recent Rooms, and Find Other Rooms, if there are
any device connections, the End Session button is red.
2. Enter the security code, if asked.
Icons
This table lists content sharing icons and their descriptions.
Icons Description
You are not signed in to the Polycom Cloud Service
You are signed in to the Polycom Cloud Service
Local content
The Polycom Cloud Service
Connecting to the Polycom Cloud Service
Failed to connect to the Polycom Cloud Service
Polycom
®
Pano
™
App
Polycom, Inc. 24