Polycom realpresence group series Release Notes

Release Notes
Polycom RealPresence Group Series, Version 4.1.1.1
16 Polycom, Inc.
These are the available parameters for use with the uspairingenabled
command.
When the RealPresence Group system is asleep, it must continue to send a
signal to the connected monitor in order for the automatic SmartPairing feature
to work. By default, the RealPresence Group system does not send a signal
when it goes to sleep.
To ensure automatic SmartPairing works even when the RealPresence Group
system is asleep, configure the system to send a black signal to the monitor
when it goes to sleep. This setting is accessible in the web interface under
Admin Settings > Audio/Video > Sleep > Display.
SmartPairing in automatic mode is supported on iPad with the RealPresence
Mobile application software version 2.1 or later. For more information on
SmartPairing, refer to the Polycom RealPresence Mobile documentation at
support.polycom.com.
Additional Diagnostic Features
Two additional diagnostic tests are now available from the local interface:
• Use the Color Bars test to verify that system monitors are adjusted correctly.
• Use the Near End Loop test to check the functionality of internal video and audio
hardware, as well as external microphones, speakers, cameras, and monitors.
Broadcast Beacon to AMX NetLinx
The API command amxdd enables or disables a broadcast beacon to an AMX
NetLinx central controller.
The beacon is part of the AMX Device Discovery protocol that defines the
connection methods and data interactions required to dynamically join a
Polycom RealPresence Group system to an AMX NetLinx central controller
using serial or IP connectivity.
For more information on this feature, refer to Integrator’s Reference Manual for
the RealPresence Group Series at support.polycom.com.
Parameter Description
Disabled Disables SmartPairing in automatic mode. You can still enter the IP address and admin
password in the RealPresence Mobile application in order to pair with the system.
Manual Enables SmartPairing in manual mode. You must enter the admin password in the
RealPresence Mobile application in order to pair with the system.
Auto Enables a RealPresence Mobile application to automatically detect and pair with the system
when in range. The application automatically unpairs when out of range.
get Returns the current SmartPairing setting.

Polycom realpresence group series Specifications

General

Video Standards	H.264, H.263, H.264 High Profile
Audio Standards	G.711, G.728
Content Sharing	People+Content
Network	H.323, SIP
Security	AES encryption
Video Input	HDMI
Video Output	HDMI
Audio Input	HDMI
Audio Output	HDMI
Audio Features	Noise Reduction, Automatic Gain Control
Connectivity	Ethernet
Ports	Ethernet, HDMI
Compatibility	Microsoft Lync / Skype for Business, BlueJeans, Zoom