Release Notes
Polycom RealPresence Group Series, Version 4.1.1.1
Polycom, Inc. 15
New Features in 4.0.1
The version 4.0.1 software includes the features and functionality of version
4.0.0.1, with the following additions.
EagleEye Acoustic Camera
EagleEye Acoustic is a compact camera designed for smaller meeting and
huddle rooms. It features 1080p with 30 frames per second performance,
electronic pan, tilt, and zoom, and built-in microphones. A unique rubberized
hinge allows you to mount the EagleEye Acoustic camera on top of a flat-panel
display.
SmartPairing in Automatic Mode
SmartPairing in automatic mode allows you to detect and pair a RealPresence
Group system from the RealPresence Mobile application on an Apple iPad
tablet. After you pair the application and the RealPresence Group system, you
can use the RealPresence Mobile application to perform two basic functions:
• Use the application as a remote control for the RealPresence Group system.
• Swipe to transfer a call from the RealPresence Mobile application to the
RealPresence Group system.
Use Telnet on a computer connected to the LAN to enable SmartPairing on the
RealPresence Group system. Send the API commands to the Polycom
RealPresence Group system through telnet port 24.
To enable SmartPairing:
1 On the computer, start a Telnet session using the Polycom RealPresence
Group system IP address and port number — for example, telnet
10.11.12.13 24.
2 Type the following to determine the current status of SmartPairing:
systemsetting get uspairingenabled
3 If SmartPairing is disabled or is in Manual mode, type the following to
enable SmartPairing in automatic mode:
systemsetting uspairingenabled Auto
Automatic SmartPairing is enabled.
To Next Page
Loading...
Need help?
General
