Release Notes
Polycom RealPresence Group Series, Version 4.1.1.1
Polycom, Inc. 25
Interoperability
TANDBERG
GS-601 4.0.0 Content does not work when a
RealPresence Group system is
in a SIP call with a Tandberg
MXP system.
Instead of using the SIP
protocol, use H.323.
Monitors GS-8188 4.0.1 On the RealPresence Group
700 system, the output display
is always black when Monitor 1
is a VGA monitor with a Sleep
setting of No Signal. If Monitor 2
and Monitor 3 are VGA monitors
and the Sleep setting is No
Signal, the system does not
send a signal to those monitors
when it goes to sleep.
Multipoint GS-9938 4.0.2 On occasion, when a
RealPresence Group 700
system is the MCU in an 8-way
call, the system has a slight
delay in responding when the
user navigates to the local
interface.
Multipoint GS-7724 4.0.2 When a RealPresence Group
system is the MCU in a 4-way
call and another endpoint sends
content, the MCU does not
display Content Call statistics
for the endpoint sending
content.
Multipoint GS-7402 4.0.0 In a multipoint call that uses a
RealPresence Group system as
the MCU and has a meeting
password greater than 32
characters, endpoints cannot
join the call.
Make sure the meeting
password is no longer
than 32 characters.
Multipoint GS-452 4.0.0 RealPresence Group systems
do not support Conference on
Demand.
People+Content GS-563 4.0.0 The RealPresence Group
Series systems do not support
Enterprise People+Content.
Use H.239
standards-based
People+Content.
Profiles GS-12625 4.1.1 All configuration settings might
not be included in a profile
export.
After importing a profile,
manually update the
settings that were not
included in the export.
Category Issue ID
Found in
Release Description Workaround
To Next Page
Loading...
Need help?
General
