User Guide SoundPoint IP 330/320
2 - 10
10. Repeat steps 5 to 7 to change the Speed Dial Index if desired.
It is automatically assigned to the next available index value.
For more information, refer to Assigning Speed Dial Indexes on page 3-15.
11. Repeat steps 5 to 7 to change the Ring Type and Divert Contact if desired.
These fields may be left blank.
For more information on setting the Ring Type field, refer to
Distinguishing Calls on page 2-15.
For more information on diverting contacts, refer to Diverting Calls on
page 2-17.
12. Repeat steps 5 to 7 to change the Auto Reject, Auto Divert, Watch Buddy,
and Block Buddy if desired.
Use , , , or to switch between Enabled and Disabled
settings.
For more information on setting the Auto Reject field, refer to Rejecting
Calls on page 1-1.
13. Press to end contact’s data entry.
14. Press the Yes or Cancel soft keys to accept or cancel changes.
15. Press repeatedly to return to the idle display.
Adding Contacts From Call Lists
To add a contact to the local contact directory from a call list:
1. Do one of the following steps:
a Press the Callers soft key to view the Received Calls list.
b Press to view the Placed Calls list.
2. Use and to scroll through the list to find the contact.
3. Press to select the entry.
To Next Page
Loading...
Need help?
General