User Guide for the SoundPoint IP 550/560 Phone
2 - 6
10. Press to return to the idle display.
Enabling the Headset Memory Mode
This feature is especially useful for permanent or full-time headset users.
To permanently enable the Headset Memory Mode:
1. Press .
2. Select Settings > Basic > Preferences > Headset... > Headset Memory...
3. Use or to select Enabled, and then press the Select soft key.
4. Press to return to the idle display.
Repeat steps 1 to 4 to select Disabled and turn Headset Memory Mode off.
To activate Headset Memory Mode:
>>
Press twice.
The flashing headset icon on the graphic display or a flashing headset key
indicates that the headset mode is activated. Pressing or the
Answer soft key to receive a call will now connect to your headset
automatically.
To Next Page
Loading...
Need help?
General