Customizing Your Phone
2 - 7
Selecting the Correct Headset for Electronic Hookswitch
This feature allows you to answer your phone when you are using a headset.
To select a headset that supports electronic hookswitch:
1. Press .
2. Select Settings > Basic > Preferences > Headset > Analog Headset
Mode.
3. Use or to select your headset, and then press the Select soft
key.
4. Press to return to the idle display.
Selecting the Ring Type
You can select different ring types to distinguish lines or to distinguish your
phone from your neighbor’s phone.
To change the incoming ring type:
1. Press .
2. Select Settings > Basic > Ring Type.
3. (Optional.) If multiple lines are configured on your phone, first select the
line to change from the list using the and .
For information on supported headsets to provide electronic hookswitch features for
placing, answering, and ending calls, go to www.polycom.com/support/voice and
enter “Headset Compatibility List” in the Knowledge Base text box or contact your
system administrator.
To Next Page
Loading...
Need help?
General