Polycom SoundStation 2W - Location Information

SoundStation2W™ Administrator Guide - 31
Change the passcode:
1. From the Admin Setup menu,
choose Passcode using the Scroll-
ing buttons and press the Select
button.
2. Press the CHANGE soft key, enter
the current passcode, and press the
ENTER soft key. If you decide not
to change the password, press the
CANCEL soft key or the Exit button.
►If you enter an incorrect pass-
word, you will be notied to try
again.
►If you make an error, press the
<DEL soft key to erase the error.
3. You will be prompted to enter a
new passcode. Enter a new pass-
code and press the SAVE soft key.
You may press the CANCEL soft key
or the Exit button if you choose not
to save the passcode.
You can assign a location name, such as “Conference
Room B” and the telephone number associated with your
SoundStation2W™. By assigning a location name you will
easily be able to return the phone to its “home room” location
or determine the location of the matching base station.
Assigning a location name:
1. Press the Menu button, choose
Admin Setup and press the
Select button, enter passcode (if
required) and press the ENTER soft
key. Choose Location using the
Scrolling buttons, and press the
Select button.
► Record the passcode. If the passcode is forgotten,
contact Polycom Support at www.polycom.com/
support and click on “How to Contact Support and
Service” for your local support contact informa-
tion.
Location Information