Polycom SoundStation Duo - Page 116

Polycom® SoundStation® Duo Conference Phone User Guide
104
To update the default Paging Group:
1 Press , and then select Settings > Basic > Preferences >
Paging/PTT Configuration > Group Paging.
2 From the Group Paging Configuration screen, in the Default Group field,
enter the number of the paging group to send pages to if you don’t
specify a group when you send a page.
3 Press the Ok soft key.
Updating Paging Group Subscriptions
By default, you’re subscribed to Paging Groups 1, 24, and 25. This means that
you can send pages to and receive pages sent to these groups. You can change
which groups you are subscribed to. However, you can’t disable your
subscriptions to Paging Groups 24 and 25.
To update your Paging Group subscriptions:
1 Press , and then select Settings > Basic > Preferences >
Paging/PTT Configuration > Group Paging.
2 From the Group Paging Configuration screen, select Group
Subscriptions.
3 From the Group Subscriptions screen, scroll to the group you want to
subscribe to, and then select Yes.
By default, you’re subscribed to Channels 1, 24, and 25.
4 Press the Ok soft key.
Allowing Pages to Play During Active Calls
The Accept While Busy option allows pages to arrive as active calls (if enabled)
or in a pending state (if disabled).
If enabled, a page will interrupt telephone calls and you’ll be able to hear the
audio of both the telephone call and the page. The party on the other end of the
telephone call cannot hear the page unless that party has also enabled
Accept While Busy.
If disabled, pages arrive in a pending state. To hear the page, scroll to the page,
and then press the Accept soft key.