Polycom SoundStation Duo - Calling and Answering from a Locked Phone

Using Your Conference Phone in SIP Mode
107
To unlock your phone:
1 From the idle screen, press the Unlock soft key.
2 From the Unlock the Phone screen, enter your password, and then press
the Enter soft key.
(For information on your user password, including what to do if you
forget your user password, see About Your User Password on page 105.)
The phone unlocks.
Calling and Answering from a Locked Phone
From a locked phone, anyone can dial the standard emergency number (for
example, 911), and up to five authorized numbers that an administrator can set
up. You cannot call any other numbers from a locked phone.
If you set up your phone so you can answer incoming calls when your phone
is locked, you can answer calls by entering your user password.
To call an authorized number from a locked phone:
>> Do one of the following:
— Press the New Call soft key. From the Place an Authorized Call screen,
select the number you want to call, and then press the Dial soft key.
The following figure shows an example of the Place an Authorized
Call screen.
or
— Place a call to an authorized number. For information on placing a call,
see Calling on page 60.
If you try to place a call to an unauthorized number, the message
‘Unauthorized number’ displays. (To view a list of authorized
numbers that you can call, press the New Call soft key from the idle
screen when your phone is locked.)
The call is placed.
Note
Your phone may be set up so that you can quickly lock it by pressing the
Lock soft key from the idle screen. If you do this, however, you cannot choose how
to handle incoming calls. Your phone will use the default setting (Allow ringing when
locked), or the last setting you selected.