Using Your Conference Phone in SIP Mode
63
To call using speed dial:
1 From the idle screen, press . If you have held calls, press the
New Call soft key first.
2 From the Speed Dial Info screen, do one of the following:
— Enter the contact’s speed dial number.
or
— Scroll to the contact you want to call, and then press the Dial soft key.
The call is placed.
Calling by Redialing
You can redial the last call you placed, or search a list of placed calls to find a
previously-dialed number.
To dial the last placed call:
>> Press .
To dial a previously called number:
1 From the idle screen, press . If you have held calls, press the New Call
soft key first.
2 From the Placed Calls list, scroll to the number you want to dial, and then
press the Dial soft key.
Ending Calls
How you end a call depends if you have an active or held call.
To end an active call:
>> Press or the End Call soft key. If you have multiple calls, scroll to the
active call first, and then end it.
To end a held call:
>> Press the Resume soft key, and then press . If you have multiple calls,
scroll to the held call first, and then end it.
To end a call from your computer or mobile phone, see Ending Mobile Phone or
Computer Audio Calls on page 92.
To Next Page
Loading...
