Polycom SoundStation IP 6000 Quick Start Guide

9
To park a call:
1. After answering the call, press the Transfer softkey.
2. Dial *34. You will hear a stutter dial tone, and then a normal dial tone.
3. Dial the seven-digit number of the phone where you wish to park the call.
• If you have four-digit dialing enabled, you must enter the leading digit
before the seven-digit number.
4. Press End Call.
To retrieve a parked call:
1. Press the Call button to hear the dial tone.
2. Dial *33. You will hear a stutter dial tone, and then a normal dial tone.
3. Dial the seven-digit number of the phone where the call is parked.
• If you have four-digit dialing enabled, you must enter the leading digit
before the seven-digit number.

Polycom SoundStation IP 6000 Specifications

General

Network Interface	10/100 Ethernet
Power over Ethernet (PoE)	Yes, IEEE 802.3af
SIP Protocol Support	Yes
Connectivity Technology	Wired
Echo Cancellation	Yes
Noise Reduction	Yes
Speakerphone	Full-duplex
Microphones	3 cardioid microphones
Microphone Type	Cardioid
Display	Backlit LCD display
Audio Technology	HD Voice, Acoustic Clarity Technology
Protocols	SIP
Network Ports	1
Power Source	PoE or optional AC adapter
Weight	1.75 lbs
Compliance	FCC
Dimensions	14.5 x 12.25 x 2.5 in (36.8 x 31.1 x 6.4 cm)