Polycom VSX Series Integrator's Reference Manual

Chapter 3 - System Commands
© Polycom, Inc. 3 - 65
lanport lanport
<auto|autohdx|autofdx|”rate”|get>
Where:
•auto: Automatically negotiates the
LAN speed and duplex mode.
• autohdx: Automatically negotiates
the LAN speed but specifies
half-duplex mode.
• audofdx: Automatically negotiates
the LAN speed but specifies
full-duplex mode.
•“rate”: Lan speed and duplex
mode:
❑ 10: 10 Mbps auto duplex
❑ 10hdx: 10 Mbps half duplex
❑ 10fdx: 10 Mbps full duplex
❑ 100: 100 Mbps auto duplex
❑ 100hdx: 100 Mbps half duplex
❑ 100fdx: 100 Mbps full duplex
•get: Returns the current setting.
Sets the LAN port settings of the
VSX system. After making a
change, you must restart the
system.
User interface screen location:
System > Admin Settings >
LAN Properties (page 2): LAN
Speed and Duplex Mode
lanport auto
numdigits-
did
numdigitsdid <{0..99}|get>
Where:
• {0..99}: Specifies the number of
digits in DID numbers.
• get: Returns the current setting.
Sets the number of digits in the
DID Gateway number (E.164
dialing). The number of digits in
the DID is that portion of the full
DID that the Gateway will be
given from the ISDN service
provider as the Called Party
Line Identifier. This, in turn, will
be passed to the Gatekeeper for
address resolution.
User interface screen location:
System > Admin Settings >
Network > IP > H.323 Settings
(page 4): Number of Digits in
DID Number
Note: For this option to be avail-
able, the Gateway Number
Type on the same page must be
set to Direct Inward Dial.
numdigitsdid 7
Command Syntax Description Example

Polycom VSX Series Specifications

General

Video Standards	H.264, H.263++
Audio Standards	G.711, G.722, G.722.1, G.728
Network Protocols	H.323, SIP
Video Inputs	S-Video, Composite video
Video Outputs	Composite, S-Video, DVI, HDMI
Audio Inputs	Line In
Audio Outputs	Line Out
Data Collaboration	H.239
Network Interfaces	Ethernet
Power Consumption	Varies depending on the specific model and configuration.