Polycom VSX Series

Integrator's Reference Manual for the VSX Series
3 - 68 www.polycom.com/videodocumentation
wanipad-
dress
wanipaddress <set|get>
wanipaddress set [“ipaddress”]
Where:
• set: Sets the WAN IP address when
followed by the “ipaddress”
parameter. To erase the current
setting, omit the “ipaddress”
parameter.
• get: Returns the WAN IP address.
• “ipaddress”: WAN IP address.
Sets the WAN IP address.
User interface screen location:
System > Admin Settings >
Network > IP > Firewall:
NAT Public (WAN) Address
Note: The NAT Configuration
option on the same page must
be set to Auto, Manual, or UPnP
for this option to be available.
wanipaddress set
192.168.1.122
winsresolu-
tion
winsresolution <yes|no|get>
Where:
• yes: Enables WINS resolution.
•no: Disables WINS resolution.
• get: Returns the current setting (yes
or no).
Sets WINS resolution. After a
change is made, the system
prompts the user for restart.
User interface screen location:
System > Admin Settings >
LAN Properties (page 2):
WINS Resolution
winsresolution no
Command Syntax Description Example